Systems Development Engineer, Antenna Calibration, Kuiper
4 weeks ago
Job ID: 2961144 | Amazon Kuiper Manufacturing Enterprises LLC
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
As Systems Engineer, you will be responsible for key aspects of phased array antenna system design, simulation, measurement, calibration and optimization. You will be working in a collaborative environment with a multi-disciplinary team to deliver advanced high-performance phased array antenna systems. In this role, your responsibilities will include:
- Designing and implementing phased array calibration systems, signals, processing and algorithms
- Performance analysis and design trade-off studies of phased arrays
- End-to-end modeling, simulation and analysis of baseband/RF/antenna systems
- Lab measurement and validation of performance of antennas, and phased array systems and subsystems
- Working with antenna, modem, RF and Digital teams to simulate, measure and fine-tune radio designs
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be U.S. citizens, U.S. permanent residents (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
- BS in Electrical Engineering with relevant coursework in digital communication theory, digital signal processing, RF/Microwave Engineering, Antennas and Electromagnetic theory
- 3+ years of work experience in Aerospace/Semiconductor/Consumer Electronics industry
- Experience in DSP techniques, digital modulation, radio architecture, line-up analysis, RF system design
- Experience with lab test equipment like VSAs, VSGs, VNAs and Oscilloscopes
- Coding and scripting skills with demonstrated experience in Matlab/Python/C++
- Experience with simulation tools such as SystemVue, ADS or LabView
- MS in Electrical Engineering with 5+ years of work experience or PhD with 2+ years of experience
- Experience working with phased arrays, calibration and antenna measurement
- Experience with one of the mainstream antenna simulation tools (CST/HFSS)
- Good understanding of modern wireless technologies (OFDM/MIMO) and medium access procedures
- Familiarity with basics of probability and estimation theory
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit this link for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $116,300/year in our lowest geographic market up to $201,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit this link.
This position will remain posted until filled. Applicants should apply via our internal or external career site.
#J-18808-Ljbffr-
Antenna Calibration Specialist
4 days ago
Dublin, Dublin City, Ireland beBee Careers Full timePhased Array System Design SpecialistThis role requires a deep understanding of digital signal processing techniques, digital modulation, radio architecture, line-up analysis, RF system design, and coding/scripting skills.Bachelor's degree in Electrical Engineering with relevant coursework in digital communication theory, digital signal processing,...
-
RF System Designer
4 days ago
Dublin, Dublin City, Ireland beBee Careers Full timePhased Array Calibration ExpertIn this role, you will be working on designing and implementing advanced high-performance phased array antenna systems. You will collaborate with a multi-disciplinary team to deliver high-quality results for our customers.MS in Electrical Engineering with 5+ years of work experience or PhD with 2+ years of experienceExperience...
-
Calibration Engineer
4 days ago
Dublin, Dublin City, Ireland Stevens Traceability Systems Ltd. Full timeJob Title: Calibration EngineerWe are recruiting for a field-based Calibration Engineer to provide calibrations for weighing equipment on customer sites in the South of Ireland, including Munster, Leinster, and Connacht.The RoleYou will visit customer sites daily, providing calibration services using certified weights up to 20kg.You will record data and...
-
Satellite Communication Engineer
4 days ago
Dublin, Dublin City, Ireland beBee Careers Full timeSatellite Broadband Connectivity EngineerWe are seeking an experienced Systems Engineer to join our team in designing and implementing phased array calibration systems, signals, processing and algorithms.Designing and implementing phased array calibration systems, signals, processing and algorithmsPerformance analysis and design trade-off studies of phased...
-
Calibration Engineer
7 days ago
Dublin, Dublin City, Ireland Stevens Traceability Systems Ltd. Full timeJob Type: Full-time, PermanentLocation: Field-based, covering the South of IrelandWe are recruiting for a Calibration Engineer located in the Midlands to service clients in and around Munster, Leinster, and Connacht. Cover will be required for holidays in Northern Ireland.Full training will be provided to the successful candidate, with the opportunity to...
-
Equipment Calibration Engineer
9 hours ago
Dublin, Dublin City, Ireland beBee Careers Full timeAbout the RoleWe are seeking a skilled Calibration Engineer to join our team. The successful candidate will have a strong background in calibration and quality assurance, with a focus on managing and maintaining calibration programs and ensuring regulatory compliance.Key responsibilities will include providing calibration services, responding to production...
-
Calibration Engineer
6 days ago
Dublin, Dublin City, Ireland beBee Careers Full timeAs an Instrumentation Engineer, you will play a vital role in ensuring that all calibrations are completed on time and to the highest standard.">Our client is a leading player in the pharmaceutical industry, with a Centre of Excellence that employs over [number of employees] people. This is a fantastic opportunity to join a team that is passionate about...
-
Calibration Technician
2 weeks ago
Dublin, Dublin City, Ireland Lotusworks Ltd Full timeLotusWorks is a global Engineering Services provider that specializes in managing complex projects within manufacturing facilities.We operate across EMEA and North America, partnering with leading manufacturers in the Semiconductor, Pharmaceutical & Biologics, Medical Device, and Data Centre sectors.Job Title: Calibration TechnicianAs a Calibration...
-
Calibration Technician
4 weeks ago
Dublin, Dublin City, Ireland LotusWorks Ltd Full timeLotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operates globally across EMEA and North America partnering with the world's leading manufacturers across the Semiconductor, Pharmaceutical &...
-
Installation and Calibration Engineer
2 weeks ago
Dublin, Dublin City, Ireland Neos Engineering Recruitment Full timeField-Based Installation and Calibration EngineerLocation: Dublin, National CoverageSalary: Competitive + BenefitsI'm working with a leading provider of cutting-edge machine control systems for the construction and heavy equipment industry. They are seeking a skilled Installation and Calibration Engineer to join their team, supporting the installation,...